LED-LAMPEN

Home>PRODUCTEN>LED-LAMPEN

UV LED Air Sterilizing system for Ductless Split HVAC Units with High Formaldehyde Removal Rate

Usage: Commerical or Household Sterilization

Golflengte: UV-C en UV-A

Application: Mini-split air conditioner for bedroom, living room, hotel and other confined space

Degradation formaldehyde rate: 89.1%

Sterilizing Rate : 99.93%



Onderzoek

Omschrijving

Tegenwoordig, UV LED+Photocatalyst is an emerging and encouraging technology for indoor air purification and decontamination using TiO2 as a catalyst under the illumination of UV LED.


With the technology, all carbon-based organic matter, including bacteria, viruses, smoke, formaldehyde, pollen, mites...(RNA & DNA materials) can be oxidized into CO2 and H2O.


Especially, most people spend more than 80% of their time in closed environments like modern office buildings, hotels, schools, and especially at home, while indoor pollution is becoming a serious air-quality problem.


daarom UV LED+Photocatalyst technology is becoming a popular sterilization solution.


HCHO under UV LED


Apart from viruses and bacterial, UV LED+Photocatalyst can also deal with the formaldehyde (HCHO) problem, which is one of the major species in polluted indoor air.


Klik om meer te weten: How can UV LED+Photocatalyst disinfect viruses and bacterial?


Formaldehyde (CH₂O) is a colorless, flammable, strong-smelling chemical that is used in building materials and to produce many household products... It can cause irritation of the skin, eyes, nose, throat, and even cancers.


Formaldehyde levels are higher in:


(1) Homes with smokers.


Smoke contains formaldehyde. If someone in your home smokes, the smoke may be the greatest source of formaldehyde in your home.


(2) Homes with New decoration.


Formaldehyde levels are higher in newly built or newly renovated homes, especially wooden furniture, soft cloth ornament, pain wall.


In general, these products will emit less and less formaldehyde over time. However, it can take weeks, months or even years to stop completely.


(3) Summeer Time


In summer, the temperature is high, the adhesive has been decomposed, and the decomposed formaldehyde molecules also have enough mobility to diffuse from the inside of the home items.


In summer, the humidity is high, and the water molecules are increased and active, which is easily transmitted to the home items, causing the adhesive to produce more deliquescence, thereby more free formaldehyde.


UV LED sterilization


Traditional methods for removing formaldehyde (HCHO) from the environment including the following ways:


(1) Ventilatie

The release cycle of formaldehyde is long, usually three or even ten years to reach the normal standard.


(2) Plant deodorization

If you use plants to remove formaldehyde, you will almost fill the entire house. Moreover, the production of photosynthesis is conditional, but formaldehyde is continuously released.


3 Activated carbon adsorption:

The adsorption capacity is very limited, it will volatilize again after the adsorption is saturated, and it needs to be replaced continuously for a long time.


(4) Scavenger

When the scavenger is sprayed in the air, it will cause new pollution hazards to people.


UV LED sterilizing solution


To better achieve sterilization effect, we have developed the UV LED+Photocatalyst technology.


(1) UV LED Strip: UVC


UVC will destroy the DNA or RNA of the bacteria&viruses, making them inactive and unable to reproduce.


(2) UV LED Strip: UVA (405nm)


The light-sensitive molecules such as riboflavin in bacterial cells can absorb specific light energy in UVA to oxidize the cells to form active molecules such as OH-, O2-, 02, thereby damaging the cell wall.


(3) 5nm Photocatalyst Filter


Immobilizing TiO2 on an adsorbent material can upgrade and refine the HCHO removal efficiency.


Daarom werd een TiO2 / AC-netwerkfilm ontworpen door nanometerdeeltje TiO2 op het oppervlak van actieve kool te vullen, om HCHO effectief te elimineren.


UVC LED sterilizing process

How does the UV sterilization process work?


1. Tio2-filter was bestraald door UV LED Strip (UVA + UVC), die het fotokatalysator-effect zal veroorzaken.


2. Onder fotokatalysatoreffect wordt een sterk oxidatiemiddel OH + geproduceerd.


3. OH + begint schadelijke stoffen te omringen en te vernietigen.


4. Alle op koolstof gebaseerde organismen, inclusief bacteriën, virussen, rook, formaldehyde, pollen, mijten enz., Zullen worden afgebroken tot H2O & CO2.


5. For harmful substances not killed by TiO2, UV LED (UVA+UVC) will offer supplementary function.


Therefore, the UV LED technology can achieve a 99.93% sterilization rate and 89.1% degradation formaldehyde rate.


why choose UVC LED


Why choose UV LED+Photocatalyst?


(1) Comprehensiveness


Effectively degrade formaldehyde, benzene, toluene, xylene, ammonia, TVOC and other pollutants in the air.


(2) Safety


No UV light leakage, harmless to the human body. The by-products after use are CO2 and H2O, which will not cause secondary pollution.


(3) High Efficiency


Our disinfection system can kill harmful substances immediately to prevent them from repairing structure and activity. The sterilization rate is 99.93% and the formaldehyde degradation rate is 89.1%.


(4) Long Lifespan


Full inorganic package technology, 10 times longer lifespan.


(5) Easy to install


Even consumers can install our UVLED+Photocatalyst System by themselves in 5 minutes.


UVC LED product

Als u meer informatie wilt of als u uw sterilisatieoplossing wilt aanpassen, laat uw bericht achter voor een diepgaande discussie.


Product Video-


Ultra Air Sterilizing LED for Mini-split


Gerelateerd artikel -


De ultieme kopersgids voor uw aankoop van UV-lampen


Effectieve UVC LED-desinfectieoplossing voor HVAC-units


Effective UVC LED Disinfection solution for Mini-split

bestek

UV LED test reports

Contact